PALLET-TABLE:
Work Area (width x length) 305 X 305mm (12x12 inch)
Indexing 4th axis 0.001 Degree
Max. Work Size 400 x 560mm
Load capacity 250 kg (550 pounds)
TRAVEL:
X axis 510 mm (20.1 inch)
Y axis 510 mm (20.1 inch)
Z axis 410 mm (16.1 inch)
Distance from table center to spindle nose 100 – 510 mm (3.9 – 20.1 inch)
Distance from table surface to spindle center 40 – 550 mm (1.6 – 21.7 inch)
SPINDLE:
Taper NST NO. 40
Speed 40 – 15,000 RPM, Geared Headstock
FEED:
Rapid feed (X axis) Auto 50,000 mm/min 1968.5 inch/min
Rapid feed (Y axis) Auto 50,000 mm/min 1968.5 inch/min
Rapid feed (Z axis) Auto 50,000 mm/min 1968.5 inch/min
Cutting feed 15,000 mm/min 590.6 inch/min
ATC:
Tool storage capacity - 40 tools
Tool selection method – random tool identified at magazine
Tool shank – Cat 40
Max tool size – 90x300 mm (3.54 X 11.8 inch)
Two neighboring tool pots should be empty:5.9” x 11.8”
Max tool weight (with tool holder) 10kg (22 pounds)
Tool change time 1.7 sec
Chip to chip (with tool orientation) Minimum 5 sec
MOTOR:
Spindle Motor (30 min ratio) AC 11 kw
(Continuous operation) AC 7.5 kw
ATC Motor AC 400 w
Coolant Motor AC 730 (50Hz/1210 (60Hz) w
Lubricant Pump Motor AC 20 w
Hydraulic Motor AC 0.75 kw
MACHINE WEIGHT:
With NC 7,000 kg (15,400 pounds)
ELECTRIC POWER SOURCE:
Main circuit Three phase current AC 200/220 v
(If the machine has a transformer, this is secondary voltage)
Frequency 50/60 Hz
INCLUDES THE FOLLOWING OPTIONS:
220 PSI CTS - Coolant Thru Spindle
Caterpillar CC – Chip Conveyor
