Contact Us:

877-526-6224

Celebrating over 30 years of service!

Click here to visit JBM Ohio

Dong Yang Engine Lathe

Category: 
Make: 
Dong Yang
Model: 
17.7/19.7" X 60"
Specifications: 

17.7/19.7" x 60" DONG YANG ENGINE LATHE
 
EQUIPPED WITH: 
Threading (Inch-Metric-DP-Module) 
12" 3-Jaw Chuck - Steady Rest 
Coolant - Chip Pan
2 Axis Digital Read Out
 
CATALOGUE SPECIFICATIONS: 
Hole Thru Spindle...................... 2"
Swing Over Bed Ways, Rated............. 17.7"
Swing Over Bed Ways, Actual............ 19.7"
Swing Over Cross-Slide................. 9.8"
Distance Between Centers............... 60"
Spindle Nose........................... A1-6
Tailstock, Spindle Diameter............ 3.15"
Tailstock, Spindle Travel.............. 6"
Tailstock, Spindle Taper............... #4 MT
(12) Spindle Speeds, Range............. 35 to 1800 RPM
(32) Carriage Longitudinal Feeds....... .001 to .028 IPR
(32) Cross-Slide Cross Feeds........... .001 to .014 IPR
Thread Range, Inch..................... 56 to 4 TPI
Thread Range, Metric................... 0.5 to 7 MM
Floor Space Required, L x D............ 151" x 60"
Weight, Approximately.................. 5280 LBS
Power Requirements………………220V; 3 Phase

Location: 
"I’m very, very pleased with JBM, for both used and new machines. They take care of all the problems. Always willing to help and make suggestions, how to make changes to go faster and their customer service is excellent. The owner will even get on the phone with you to solve problems so you don’t have to wait for service. "
Dave Chiocchi